SPECS & QUICK START GUIDE

Dimension: 48.5cm x 39.3cm x 23.9cm (19.1'' x 15.5'' x 9.41'')

Weight: 4700g (10.36 lbs)

Battery Life: 4 hours (8800mAh)

Charger: AC 100V～240V, DC 14V，3A

External interface: Video interface, VGA interface, USB2.0 interface

Probe Element: 96

Probe Frequency

Convex Probe: 3.5MHz

Scan Depth: ≥160mm

Linear Probe: 7.5MHz

Scan Depth: ≥50mm

Gray Scale: 256 levels

Cine Loop: ≥500 frames

Image Storage: ≥64 frames

Image Magnification: Depth adjustment (16 levels adjustable)

Focus: Adjustable, 5 steps

Image Adjustment: Gain, TGC, Up/down, Left/right, Brightness, Number of focus points, Focus distance, Focus position, Dynamic range, Scan angle, Frame correlation, M speed, Scan depth, Freq

Image Zoom: 7 levels: 0.9,1.0,1.1,1.2,1.3,1.5,2.0

Image Processing: Image smoothing/sharpening, tissue harmonics, gamma correction, histogram, pseudo-color

Notes and Characters: Date, time, name, age, gender, image comment

Measurements: 

General measurements: Distance, perimeter/area, volume, angle, histogram, depth

Cardiac measurements: Depth, slope, heart rate, period 

Obstetrical Measurement: 8 kinds of animal obstetrical measurement packages (Llama, Equine, Bovine, Ovine, Swine, Canine, Feline)

Body Position Markers: ≥17 (Equine, Bovine, Ovine, Swine, Canine, Feline)

Languages:

English, French, Spanish, Chinese, Portuguese, Russian.

Install the probe:

Unlock the probe plug (to be possible to rotate) and put it in the probe socket on the main engine to fasten the plug reliably, and put the probe in the probe box in the operation panel.

Operation:

1. Turn on the power switch on the left side of the host (put the power switch in "|" state). The instrument is working, the power indicator light on the panel is on, and the real-time B-mode image detection is working status. After warming up for one minute, comprehensively adjust the total gain, near field, far field, brightness, and contrast knobs to get the best status.

2. Press the "Setup" key to call out the "System Setup" menu on the right side of the screen. Select "Basic Settings", and the interface will pop up, select the animal type.

3. Press the "New-P" button to input the basic information of the animal.

4. Apply the medical ultrasonic coupling on the surface of the probe, put the probe on the scanning site, and observe the real-time image on the screen.

5. Press the (Freeze) key to freeze the image after scanning, and perform measurement operations on the image.