How to Print via the Network Printer
A. Install the PC Printing Software
1. Ensure the computer is connected to a printer, which is set as the default printer.
2. Download and install the printing software
a. Please click the link below to finish the software setup.
b. Double-click the "PrinterServer.exe" program, as shown in Figure 1, click "Register" first for copyright registration, as shown in Figure 2 after successful registration.
c. Click "Test" to test whether the printer is working properly.
Figure 1
Figure 2
B. Setting Step on the PC
1. Connect the monitor and computer with network cable.
2. Turn on the patient monitor.
3. Open the computer control panel, click "Network and Internet", as shown in Figure 3.
4. Click Network and Sharing Center, as shown in Figure 4.
Figure 3
Figure 4
5. Click Internet, as shown in Figure 5.
Figure 5
6. Choose Properties, then click Internet Protocolversion4 (TCP/IPV4) to set IP address, as shown in Figure 7.
Figure 6
Figure 7
7. In the following IP address (S), enter IP address 192.168.2.188, click the subnet mask, the system will automatically fills in (255.255.255.0); Click “OK”. Then Click the “Disable” in the Internet Status.
Figure 8
Figure 9
8. Then in the Network and Sharing Center, click ”Change adapter settings”, then choose ”Internet” and right-click to choose the “Enable”, the icon color changes to blue.
Figure 10
Figure 11
C. Test Whether the Monitor is Connected to the Computer Network
1. Choose Maintenance in the main menu.
2. Input the user password 2023, then into the user maintenance.
3. Set IP, IP Add: 192.168.2.28, which is the IP address of the monitor.
4. Enter "WIN+R" on the computer to enter the running interface, enter "cmd".
5. Input "ping 192.168.2.28" and click enter, if the following interface appears, network communication is normal. If accepted = 0, lost = 4, the network is not connected, it is necessary to reset the IP address of the computer according to step 7 and Step 8.
D. Change the Monitor IP Address
1. Click the Main menu of the monitor, then choose Maintenance
2. Input the user password 2023, then into the user maintenance.
3. Set IP address: choose "wire " in the CMS channel, input the "192.168.2.188" (IP address set on the computer) in the Pringer IP, then close and restart the patient monitor.
